1. AC220V input, AC220V output, output terminal is connected to detected host directly.

2. It enjoys the function of RS232 communication with detected host. If the agreed signal of the connected equipment can not be detected in the set time, it will cut the host power and connect the power again after the set time. If the monitored host still can not send agreed signal, the host protector will repeat the above operations. After three times, it will output alarm signal and buzzer signal.

3. With the function of one switch output;

4. With the function of 12V switch power output;

5. RS232 output spared;

6. With self-buzzer output function, the buzzer will produce sound when detected host comes into a fault. Jumper on the panel controls whether buzzer produces sound or not.

7. With the function of recording and inquiring death time;

Anti-death host monitor has been widely applied in finance, business, self-service banking equipment, self-service tickets vending machine, monitoring host, self-service vending, ATM monitoring, unattended host equipment and computer host high-tech products, etc. microcircuit chip is used inside as program-controlled processing.

Parameters

Voltage: AC220V;

Power consumption: 2.4W;

Relative humidity: 90% RH;

Loading: 1000W

Functions and features

Use RS232 communication protocol

When host is abnormal, it will cut the power and restart and provide alarm tips in a short time.

If host is abnormal continuously, the host monitor provides alarm tips all the time until maintainer interferes.

It provides alarm tips when the host power is cut spitefully.

Embedded with dry battery, host monitor can send alarm tips when its main power comes into unauthorized cutting.

It provides bypass function, automatically connecting host power when it is destroyed completely.

Application

It can be widely used in unattended public equipment such as ATM monitoring host, ATMs, vending, telecommunications room, mobile station, PC, IPC, DVR and working host with RS232 interface.

Note: the maximum power consumption of monitored equipment is less than 1000W.